How To Replace The Ballscrew Steel Ball Falling Out

For ball screws, there are generally specialized technicians who use special tools, and Yongrun Precision Machinery, a professional screw manufacturer, will answer your questions!

1. Clean the screw nut and ball first.

2. Put the plastic ball stopper (ball reverser) back into the nut. When installing, pay attention to the smooth joint between the inlet and outlet of the ball and the spiral groove.

3. Coat the nut with grease.

4. Place the ball in the spiral groove. Please note that not all spiral grooves have fillers, the principle of placing balls is that the ball stopper is a circular garden, and if the nut is three turns, then it is three turns.

5. Screw the nut into the lead screw (be careful not to drop the ball). Use a bead to fit the nut, and another axle, the outside diameter of the axle a little smaller than this inside diameter, and put it in the nut so the nut doesn't fall out.

6. Turn the nut forward and backward to check whether the nut runs smoothly, if it is stable, it is OK.

To be honest, there are really capable people who can get it up, but if you can't do it yourself, you should find a professional ball screw company to help you with the installation. Yongrun Precision Machinery is a manufacturer specializing in the production of screw rods.