What Should I Do If The Ball Screw Of The Plane Mask Machine Is Rusted?

Rust is a common phenomenon of mechanical equipment, and rust prevention has also become an indispensable procedure in the use of mechanical equipment. So what are the common anti-rust treatment, working environment and installation points of the ball screw of the mask machine:

1. First of all, when the ball screw is not rusted, please wear gloves to remove the accessories and operate, do not touch them directly. After installation, it is necessary to apply a layer of anti-rust oil on the surface of the ball screw, and then carry out other operations, especially in humid summer, it is necessary to take corresponding moisture-proof measures.

2. In the working environment of the equipment using the ball screw, the scum attached to the surface of the screw must be cleaned regularly, and cleaning grease must be added at the same time. After the scum enters the ball screw, many defects can be created. For example, increased wear on the screw leads to increased mechanical vibration and increased noise, which can make the ball screw run poorly.

3. When installing the ball screw, read the manual carefully first. During the whole installation process, there should be no strong stamping phenomenon, let alone knocking and installing the ball screw.

The reasons for the rust of the ball screw of the mask machine:

If a lot of sand or metal chips are stuck on the screw nut, these things can easily scratch the surface of the screw, increase the roughness of the surface of the screw, and even scrape off the anti-rust grease on the surface of the screw. , thereby reducing the rust resistance of the screw, so that the surface of the screw will rust without anti-rust grease.

We can find out in time whether the ball screw still has rust resistance by performing external inspection and analysis, microscopic analysis, chemical composition analysis, SEM+EDS analysis, metallographic structure, hardness test and other operations on the screw, so as to carry out anti-rust treatment , or regularly apply anti-rust oil to the ball screw, and maintain it to enhance the service life of the ball screw.