Home / Products / Ball Screw End Support / Details

Bearing Steel Ball Screw Support Unit FK Type

Bearing Steel Ball Screw Support Unit FK Type

Send Inquiry

Product Introduction

Description

This type of ballscrew support is very common in the DIY CNC world. It never had our preference, since it's not so easy to mount a stepper motor or servo to this support. We prefer to use the FK type bearing blocks with MB Motor Backets in our applications. But we see that clients hold on requesting these blocks. Further we see that when you wish to drive the ballscrew with a belt, this is a good and easy standard solution. So we decided to begin income of these products as well. There are many BK blocks on the market, and the problem is, they all look the same. Prices range greatly. We have chosen to buy/sell only the highest quality bearings (P5 Taiwan) suitable for ballscrews in quality class C3 through-C10. The blocks we have in stock with the high quality bearings is the type that can be made backlash free, by adjusting the pre-load on the angular contact bearings. Be aware that many webshops offer only the C7 type, which has normal deep groove bearings, and then don't have any pre-load, which means you will have backlash in axial direction. When you add the BK support to your cart, the website, will advise the correct BF Floating Support, which is wished on the other side of the ballscrew.

Product Details

End supports are more than just an accessory; they are essential to the performance of linear ball screw assemblies. There are two primary variations of end supports for a linear ball screw.

Simple or Floating Support – used for a single ball bearing to assist the ball screw meeting in opposition to radial loads.

Fixed Support – used for angular contact thrust bearings to counteract axial and radial forces contacting the ball screw.

Product Description

Bearing housing support units for ballscrew spindle can be used on fixed and supported ends of the ballscrew, which mounts the ballscrew in the desired position. Its compact size is effortless to install, mainly in the narrowed space. Since the bearings are greased and adjusted to the suitable position, there is no need for additional alignment or installation processes, which reduces set up time and maintenance.

Our merchandise are broadly used in automatic machinery and equipment, such as machine tools, printing machinery, chemical machinery, medical machinery, woodworking equipment and robots, etc.

Product Information
Product Name	Bearing Steel Ball Screw Support Unit FK Type
Model	FK5, FK-6, FK-8, FK-10, FK-12, FK-15, FK-20, FK-25, FK-30, FF-6, FF-10, FF-12, FF-15, FF-20, FF-25, FF-30
Definition	The support seat is a key component that transmits various static and dynamic loads on the cross support and supports the cross support.
Application	CNC machines, medical and food machinery, fitness machinery, packaging machinery, printing machinery, and other machinery supporting equipment.
Feature	Support large axial forces Sealing characteristic Rigid construction
Delivery Time	3~5 days for sample order, 7~10 days for small order, 10~20 days for bulk order. It depends on the actual shipping situation.
Product Package	a. Plastic bag with box case or wooden case. b. According to our customer's request. We can provide shipping information to our customer at any time