POS20 Rod End Bearing

Description

POS20 Rod-End Bearings, also called heim joints or spherical rod ends, are articulating joints that are attached to the ends of tie rods, steering links, and cylinders to supply a transfer of motion and pressure between two points. POS20 bearings consists of a spherical swivel with a cylindrical bore pressed into a housing with a threaded shank.

Product Details

According to its different types and structure, can bear radial load, axial load or radial, axial at the same time the combined load. Due to the inner circle of the outer spherical surface with composite materials, so the bearing can produce self-lubrication in the work. Generally used for low speed swing movement, but also in a certain angle range for tilting movement, when the support shaft and shaft shell hole is now not the coronary coronary heart of the larger, but still can work normally. Self-lubricating joint auxiliary bearings are used in water conservancy, expert machinery and different industries.

Product Description

Because the spherical sliding contact area of the joint bearing is large, the tilt angle is large, but also due to the fact most of the joint bearing to take a special process treatment methods, such as surface phosphating, zinc plating, chromium plating or outer sliding surface lining, inlay, spraying, etc.. Therefore there is a greater load capacity and impact resistance, and has corrosion resistance, put on resistance, self-aligning, good lubrication or self-lubrication without lubrication dirt pollution, even if the set up of misalignment can work properly. For this reason, spherical undeniable bearings are widely used for oscillating, tilting and rotating actions at low speeds.

Hot Tags: pos20 rod end bearing, China, suppliers, manufacturers, factory, customized, wholesale, price, free sample